现场冷再生技术有什么特点?_行业资讯_新闻中心-山东途畅路桥工程有限公司

行业资讯

现场冷再生技术有什么特点?

来源：https://www.sddhfjx.com/ 日期：2020-09-02

　　现场冷再生技术特点

　　Technical features of on site cold regeneration

　　1、成本低:根据国外的施工资料介绍，与在旧路面层上加铺新料的方法相比，就地冷再生约可降低成本20%～46%。

　　1. Low cost: according to the introduction of foreign construction materials, compared with the method of paving new materials on the old pavement layer, the cost of cold in place recycling can be reduced by 20% ~ 46%.

　　2、不损坏路基:由于冷再生施工为一次性作业方式，再生机组在暴露的路基上只通过一次。所以与传统施工方法相比，对路基的损害要小的多。

　　2. No damage to Subgrade: as the cold recycling construction is a one-time operation mode, the regeneration unit only passes through the exposed subgrade once. Therefore, compared with the traditional construction method, the damage to the subgrade is much smaller.

　　3、节约材料:所有旧铺层材料全部就地利用，从而大大减少了新材料的用量，节约保护了资源。

　　3. Material saving: all the old paving materials are used in place, which greatly reduces the consumption of new materials and saves and protects resources.

l冷再生机租赁

　　4、工期短:由于不存在旧料的运输问题，不需要其他机械对旧料的靶松和破碎，更重要的是冷再生租赁机施工过程的一次性作业特点大大简化了施工程序，从而节约了施工时间。

　　4. Short construction period: as there is no transportation problem of the old materials, there is no need for other machinery to loose and crush the old materials. More importantly, the one-time operation characteristics of the construction process of the cold recycling leasing machine greatly simplifies the construction procedure, thus saving the construction time.

　　5、保护环境:因为旧料的利用大大减少了新材料的开采量，也不存在旧料的运输和堆放问题。从根本上满足了环境保护的需求。

　　5. Environmental protection: because the utilization of old materials greatly reduces the mining amount of new materials, there is no transportation and stacking problem of old materials. It basically meets the needs of environmental protection.

　　以上是关于冷再生技术的特点介绍，感谢您的阅读，希望对您有所帮助。

　　The above is about the characteristics of cold regeneration technology, thank you for your reading, hope to help you.

上一条：粉料撒布车比人工撒布好在哪里？

下一条：水泥粉料撒布车是冷再生最佳伴侣！